海洋学研究 ›› 2016, Vol. 34 ›› Issue (3): 80-85.DOI: 10.3969/j.issn.1001-909X.2016.03.013

• 研究报道 • 上一篇    下一篇

船载水样自动采集系统

李超1, 司惠民*1, 关一1, 于灏2   

  1. 1.国家海洋技术中心,天津 300112;
    2.国家海洋局 北海海洋技术保障中心,山东 青岛 266033
  • 收稿日期:2016-01-18 修回日期:2016-07-10 出版日期:2016-09-15 发布日期:2022-11-24
  • 通讯作者: * 司惠民(1987-),男,工程师,主要从事海洋环境监测技术研究。E-mail:zdhshm@163.com
  • 作者简介:李超(1978-),男,天津市人,高级工程师,主要从事海洋观测技术研究。E-mail:superman5867@163.com
  • 基金资助:
    国家高新技术研究发展计划(“863计划”)项目资助(2007AA09210112,2007AA092001-8)

Shipborne seawater automatic sampling system

LI Chao1, SI Hui-min*1, GUAN Yi1, YU Hao2   

  1. 1. National Ocean Technology Center,Tianjin 300112,China;
    2. North China Sea Marine Technical Support Center,SOA,Qingdao 266033,China
  • Received:2016-01-18 Revised:2016-07-10 Online:2016-09-15 Published:2022-11-24

PDF

88

摘要： 为了适应我国近海海洋环境监测快速、多要素的现场监测需求,研制了一套船载水样自动采集系统,系统控制方式简单灵活,具有全自动、半自动和手动三种控制模式。该系统由采水泵、复合采水缆、电动绞车、电控柜、储水罐等硬件和控制软件组成。在软件的控制下,绞车、采水泵等执行元件可自动开启和关闭,自动完成同一地点不同深度的多层水样采集。与传统人工采水方式相比,可大大减轻实验人员的劳动强度,减小水样采集的深度误差。渤海和东海大量的海上试验证明该系统性能稳定,能够适用于营养盐分析仪对水样的要求。

关键词: 海洋环境监测, 船载, 水泵, 自动采样

Abstract: In order to meet the requirements of fast and multi-factors monitoring of the marine environment, a kind of shipborne automatic sampling system (SASS) was developed. SASS has a simple and flexible operation system, and has three control modes: automatic, semi-automatic and manual mode. The hardware of SASS mainly consists of pump, composite cable, electric winch, electric control cabinet and storage tank. With the control of the software, the devices such as winch and collecting pump can open and close automatically, to complete the collection of multi-level seawater samples in same site. Compared with the traditional method, this system can greatly reduce the labor intensity of the experimenters, and improve the precision of sampling depth. After a large number of sea trials in the Bohai Sea and in the East China Sea, SASS has been proved to be stable.

Key words: marine environment monitoring, shipborne, pump, automatic sampling

中图分类号: