海洋学研究 ›› 2021, Vol. 39 ›› Issue (1): 38-46.DOI: 10.3969/j.issn.1001-909X.2021.01.005

• 研究论文 • 上一篇    下一篇

一种移动式海洋地震仪的硬件电路研究

侯斐1,2, 朱心科*1,2, 丁巍伟1,2, 孟肯1,2,3   

  1. 1.自然资源部 海底科学重点实验室,浙江 杭州 310012;
    2.自然资源部 第二海洋研究所,浙江 杭州 310012;
    3.杭州电子科技大学 机械工程学院,浙江 杭州 310018
  • 收稿日期:2020-11-12 出版日期:2021-03-15 发布日期:2021-03-15
  • 通讯作者: *朱心科(1980-),男,副研究员,主要从事海底探测技术的研发与集成。E-mail:zhxk@sio.org.cn
  • 作者简介:侯斐(1996-),男,山东省诸城市人,主要从事海洋设备控制系统研发。E-mail:1418213026@qq.com
  • 基金资助:
    国家重点研发计划(2017YFC0305802);浙江省重点研发计划(2021C03186);国家自然科学基金(U1709202);“全球变化与海气相互作用”专项(GASI-02-SHB-15);中央级公益性科研院所基本科研业务费专项资金资助项目(JT1802)

A hardware circuit design for mobile ocean seismograph

HOU Fei1,2, ZHU Xinke*1,2, DING Weiwei1,2, MENG Ken1,2,3   

  1. 1. Key Laboratory of Submarine Geosciences,Ministry of Natural Resources,Hangzhou 310012,China;
    2. Second Institute of Oceanography,Ministry of Natural Resources,Hangzhou 310012,China;
    3. School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China
  • Received:2020-11-12 Online:2021-03-15 Published:2021-03-15

摘要: 针对移动式海洋地震仪对控制系统电路设计的可靠性和低功耗的需求,提出了一种基于Cortex-M4内核芯片的硬件电路设计方案。首先选用超低功耗的STM32L4芯片作为微控制单元,在保证高运行能力的同时降低自身功耗;其次针对MCU(Microprogrammed Control Unit)、传感器等超低功耗模块提出针对性的两级降压方案,从而大大提高电路的电能转换效率;对于浮力调节模块、通信模块等高功耗模块,选用合适的降压芯片保证电路安全和提高转换效率;最后针对外部设备的周围电路进行滤波和保护处理。通过试验分别验证了不同模块的可靠性,证明该硬件电路可以支撑地震仪完成完整的观测任务,电路设计可靠性高。

关键词: 移动式海洋地震仪, STM32, 硬件电路, 低功耗设计

Abstract: Aiming at the requirements of the mobile ocean seismograph for high reliability and low power consumption of the control system, a hardware circuit design scheme based on the Cortex-M4 core was proposed. Firstly, the ultra-low-power consumption STM32L4 was selected as the MCU(Microprogrammed Control Unit) to ensure high operating capacity and reduce power consumption; secondly, a targeted two-level voltage reduction scheme was proposed for the ultra-low-power modules, such as MCU and sensor system, to greatly improve the power conversion efficiency of the circuit and a suitable buck chips was selected for the high-power modules such as buoyancy adjustment systems and communication systems to ensure circuit safety and improve the conversion efficiency. Finally, the peripheral circuit was filtered and protected. The reliability of the different modules was verified through tests which prove that the hardware circuit can support the seismograph to achieve the complete observation task and the circuit design is highly reliable.

Key words: mobile marine seismograph, STM32, hardware circuit, low-power design

中图分类号: